Blindaje de cinta longitudinal corrugada de cobre
Equipos de control, señalización, medición, protección y comandos eléctricos en subestaciones de alta tensión (SSEE), su blindaje permite el adecuado filtrado de interferencias electromagnéticas a frecuencias hasta 1 MHz. Instalaciones aéreas en bandeja, canaletas o conductos, bajo techo o a la intemperie, enterrados en ductos o directamente enterrados.
Estandar | ||
---|---|---|
Cubierta | Conductores | |
Multipolar | ![]() | ![]() |
La información suministrada corresponde a la versión estándar, pudiendo ser utilizadas bajo pedido diferentes alternativas de materiales de aislación y/o cubierta.
Sección nominal (mm²) | Resistencia eléctrica a 20°C en C.C. (Ohm/km) | Resistencia eléctrica a 90°C en C.A. (Ohm/km) | Intensidad admisible cables en aire. A 40°C según IEC 364-5-523. Formaciones en bandejas perforadas o tipo escalera. (Amper) | ||||||
---|---|---|---|---|---|---|---|---|---|
2x | 4x | 7x | 10x | 19x | 30x | 48x | |||
1 | 19.5 | 24.86 | -- | -- | -- | -- | -- | -- | -- |
1.5 | 13.3 | 16.96 | 23 | 20 | 16.1 | 11.5 | 11.5 | 10.4 | 8.1 |
2.5 | 7.98 | 10.18 | 31 | 28 | 21.7 | 15.5 | 15.5 | 14.0 | 10.9 |
4 | 4.95 | 6.31 | 43 | 36 | 30.1 | 21.5 | 21.5 | 19.4 | -- |
A partir de 7 conductores se aplica adicionalmente los factores de corrección para mas de 3 conductores de la tabla 310.15 (B)(3)(a) del NFPA70.
Formación del cable N° Cond. x sección (mm²) | Diámetro bajo blindaje mm | Diámetro exterior mm | Peso kg/km | Código |
---|---|---|---|---|
2x1 | 8.7 | 14.6 | 314 | GX 0210 |
3x1 | 8.7 | 14.6 | 317 | GX 0310 |
4x1 | 8.7 | 14.6 | 318 | GX 0410 |
5x1 | 8.7 | 14.6 | 321 | GX 0510 |
7x1 | 9.7 | 15.6 | 361 | GX 0710 |
10x1 | 11.7 | 17.6 | 431 | GX 1010 |
12x1 | 12.2 | 18.1 | 452 | GX 1210 |
14x1 | 13.2 | 19.1 | 495 | GX 1410 |
19x1 | 15.2 | 21.1 | 590 | GX 1910 |
24x1 | 16.7 | 22.6 | 667 | GX 2410 |
30x1 | 18.7 | 24.6 | 777 | GX 3010 |
37x1 | 20.7 | 26.6 | 898 | GX 3710 |
48x1 | 23.2 | 29.1 | 1072 | GX 4810 |
2x1.5 | 8.7 | 14.6 | 319 | GX 0215 |
3x1.5 | 8.7 | 14.6 | 324 | GX 0315 |
4x1.5 | 8.7 | 14.6 | 328 | GX 0415 |
5x1.5 | 9.7 | 15.6 | 366 | GX 0515 |
7x1.5 | 10.2 | 16.1 | 396 | GX 0715 |
10x1.5 | 12.7 | 18.6 | 492 | GX 1015 |
12x1.5 | 13.7 | 19.6 | 540 | GX 1215 |
14x1.5 | 14.2 | 20.1 | 568 | GX 1415 |
19x1.5 | 16.7 | 22.6 | 703 | GX 1915 |
24x1.5 | 18.2 | 24.1 | 796 | GX 2415 |
30x1.5 | 20.2 | 26.1 | 926 | GX 3015 |
37x1.5 | 22.2 | 28.1 | 1068 | GX 3715 |
48x1.5 | 25.2 | 31.3 | 1329 | GX 4815 |
2x2.5 | 8.7 | 14.6 | 330 | GX 0225 |
3x2.5 | 8.7 | 14.6 | 341 | GX 0325 |
4x2.5 | 9.7 | 15.6 | 381 | GX 0425 |
5x2.5 | 10.7 | 16.6 | 427 | GX 0525 |
7x2.5 | 11.7 | 17.6 | 489 | GX 0725 |
10x2.5 | 14.2 | 20.1 | 601 | GX 1025 |
12x2.5 | 15.2 | 21.1 | 663 | GX 1225 |
14x2.5 | 16.2 | 22.1 | 726 | GX 1425 |
19x2.5 | 18.7 | 24.6 | 894 | GX 1925 |
24x2.5 | 20.7 | 26.6 | 1048 | GX 2425 |
30x2.5 | 23.2 | 29.1 | 1256 | GX 3025 |
37x2.5 | 25.7 | 31.6 | 1485 | GX 3725 |
48x2.5 | 29.5 | 36 | 1914 | GX 4825 |
2x4 | 9.7 | 15.6 | 380 | GX 0240 |
3x4 | 10.2 | 16.1 | 416 | GX 0340 |
4x4 | 11.2 | 17.1 | 469 | GX 0440 |
5x4 | 12.2 | 18.1 | 526 | GX 0540 |
7x4 | 13.2 | 19.1 | 610 | GX 0740 |
10x4 | 16.2 | 22.1 | 769 | GX 1040 |
12x4 | 17.7 | 23.6 | 876 | GX 1240 |
14x4 | 18.7 | 24.6 | 959 | GX 1440 |
19x4 | 21.7 | 27.6 | 1211 | GX 1940 |
24x4 | 24.2 | 30.1 | 1456 | GX 2440 |
30x4 | 26.7 | 32.8 | 1751 | GX 3040 |
37x4 | 29.5 | 36 | 2103 | GX 3740 |