Marlew

Block series MX-W

600 Volt
Cu 16 up to 10 AWG
XLPE 90°C
ICEA S 73-532

Control, signalling, measuring and protective equipment; electric controls of industrial installations. Installed in aerial trays, gutters or conduits, under roof or ladder under roof, buried in ducts or directly buried. It provides additional electromagnetic protection.

Features

  • Temperature ratings: 90°C (Operating) – 130°C (Overload) – 250°C (Short Circuit)

  • Voltage rating: 600 Volt A.C.

  • Construction requirements: As per ICEA S 73-532

  • Conductor requirements: ASTM B174

  • Conductor: Annealed electrolytic copper - Flexible stranding

  • Insulation: XLPE (Cross-Linked Polyethylene)

  • Shield: Helical copper tape with 100% coverage and adequate overlap

  • Sheath: Flame retardant PVC, sunlight, and mineral oil resistant

  • Fire requirements: As per ICEA T 30-520

  • Oils requirements: As per ICEA S 73-532

  • Outdoors requirements: As per UL 2556 (UV rays)

Electromagnetic interference protection

Electromagnetic interference protection

Fire-retardant

Fire-retardant

Mineral oil resistant

Mineral oil resistant

UV resistant

UV resistant

Industrial applications

Industrial applications

Tray cable

Tray cable

Identification

Standard
Sheath Conductors
MulticonductorMethod 3 Table E-2

Instalation

falta label en campo?
falta label en campo?
falta label en campo?

ELECTRICAL CHARACTERISTICS

Resistances and intensity of admissible currents

Gauge AWG Electrical resistance at 20°C in C.C. (Ohm/km) Electrical resistance at 90°C in C.A. at 60Hz (Ohm/km) Current-carrying capacity (1)
2x 4x 7x 10x 19x 30x
1613.9917.841814.412.6998.1
148.7711.18252017.512.512.511.3
125.527.04302421151513.5
103.484.44403228202018

(1) Current-carrying capacity of cables with up to three conductors, installed in ducts or directly buried, up to an ambient temperature of 30ºC, according to chart 310.15 (B)(16) of the NFPA 70. As from four-conductors, we’ve additionally applied the correction factor for more than three conductors from the chart 310.15 (B)(3)(a) of the NFPA70.

DIMENSIONS & WEIGHT

Cable Formation N° Cond. x gauge AWG Diameter below shield mm External diameter mm Weight kg/km Code Mat Number
5x188,211610,8916175,093MX-W 5x18820034040
7x188,946211,6262204,891MX-W 7x18820034050
10x1810,649214,0092276,103MX-W 10x18820034060
12x1811,499114,8591309,728MX-W 12x18820034070
14x1812,280715,6407342,299MX-W 14x18820034080
19x1814,417,8439MX-W 19x18820034090
24x1815,939819,2998515,77MX-W 24x18820034100
30x1817,578221,9582654,122MX-W 30x18820034110
3x167.410.1156MX-W 3x16820034130
4x168.210.8180MX-W 4x16820034140
5x168.911.6207MX-W 5x16820034150
7x169.712.3238MX-W 7x16820034160
10x1611.614.9330MX-W 10x16820034170
12x1612.916.3389MX-W 12x16820034180
14x1613.817.2431MX-W 14x16820034190
19x1615.719.1535MX-W 19x16820034200
24x1617.420.8635MX-W 24x16820034210
30x1619.223.7818MX-W 30x16820034220
2x148.311.0183MX-W 2x14820034230
3x148.811.5208MX-W 3x14820034240
4x149.712.3235MX-W 4x14820034250
5x1410.714.0298MX-W 5x14820034260
7x1411.715.0357MX-W 7x14820034270
10x1414.317.7469MX-W 10x14820034280
12x1415.518.9534MX-W 12x14820034290
14x1416.619.9598MX-W 14x14820034300
19x1419.023.3805MX-W 19x14820034310
24x1421.626.01011MX-W 24x14820034320
30x1423.828.31197MX-W 30x14820034330
2x129.211.9226MX-W 2x12820034340
3x129.912.5255MX-W 3x12820034350
4x1210.914.2325MX-W 4x12820034360
5x1211.915.3381MX-W 5x12820034370
7x1213.516.8480MX-W 7x12820034380
10x1216.119.4610MX-W 10x12820034390
12x1217.420.7701MX-W 12x12820034400
19x1221.926.31116MX-W 19x12820034420
24x1224.228.71341MX-W 24x12820034430
30x1226.831.21602MX-W 30x12820034440
2x1010.513.8306MX-W 2x10820034450
3x1011.214.5360MX-W 3x10820034460
4x1012.315.7428MX-W 4x10820034470
5x1014.017.3524MX-W 5x10820034480
7x1015.318.7647MX-W 7x10820034490
10x1018.322.7879MX-W 10x10820034500
19x1024.929.41529MX-W 19x10820034530
24x1027.732.11853MX-W 24x10820034540
30x1030.735.12234MX-W 30x10820034550