Clad series MM-H

Steel wire armour

600 Volt

Cu 16 up to 10 AWG

PVC 75°C

ICEA S 73-532

Control, signalling, measuring and protective equipment; electric controls of industrial installations. Installed in aerial trays, gutters or conduits, under roof or ladder under roof, buried in ducts or directly buried. It has additional mechanical protection.

Features

Temperature rating: 75ºC (operating), 160°C (short circuit)
Voltage rating: 600V AC
Construction requirements: As per ICEA S 73-532
Conductor requirements: As per ASTM B174
Conductor: Annealed electrolytic copper; flexible
Insulation: PVC
Bedding: PVC
Armour: Galvanized steel wire armour
Sheath: PVC fire-retardant; sunlight and mineral-oil resistant
Fire requirements: As per ICEA T 30-520
Oils requirements: As per ICEA S 73-532
Outdoors requirements: As per UL 2556 (UV rays)

Fire-retardant

Mineral oil resistant

UV resistant

Industrial applications

Tray cable

Direct burial

Identification

	Standard
	Sheath	Conductors
Multiconductor		Method 3 Table E-2

Instalation

Installation temperature

Over armour

Minimum bend radius

Download PDF

ELECTRICAL CHARACTERISTICS

Resistances and intensity of admissible currents

Gauge AWG	Electrical resistance at 20°C in C.C. (Ohm/km)	Electrical resistance at 75°C in AC. a 60Hz (Ohm/km)	Current-carrying capacity (1)
Gauge AWG	Electrical resistance at 20°C in C.C. (Ohm/km)	Electrical resistance at 75°C in AC. a 60Hz (Ohm/km)	2x	4x	7x	10x	19x	30x
16	13.99	17.01	14.4	11.5	10	7.2	7.2	6.5
14	8.77	10.66	20	16	14	10	10	9
12	5.52	6.72	25	20	17.5	12.5	12.5	11.3
10	3.48	4.23	35	28	24.5	17.5	17.5	15.8

(1) Current-carrying capacity of cables with up to three conductors, installed in ducts or directly buried, up to an ambient temperature of 30ºC, according to chart 310.15 (B)(16) of the NFPA 70. As from four-conductors, we’ve additionally applied the correction factor for more than three conductors from the chart 310.15 (B)(3)(a) of the NFPA70.

DIMENSIONS & WEIGHT

Cable Formation N° Cond. x gauge AWG	Diameter under armour mm	External diameter mm	Weight kg/km	Code
2x16	8.2	12.3	282	MM 0216 H
3x16	8.7	12.8	310	MM 0316 H
4x16	9.4	14.3	372	MM 0416 H
5x16	10.3	16.1	515	MM 0516 H
7x16	11.2	17.0	580	MM 0716 H
10x16	13.9	19.7	745	MM 1016 H
12x16	14.9	20.7	818	MM 1216 H
14x16	15.9	22.4	1006	MM 1416 H
19x16	18.0	24.5	1195	MM 1916 H
24x16	19.8	26.3	1363	MM 2416 H
30x16	22.9	29.4	1671	MM 3016 H
2x14	10.5	16.3	520	MM 0214 H
3x14	11.2	17.0	573	MM 0314 H
4x14	12.2	18.0	639	MM 0414 H
5x14	14.2	20.0	761	MM 0514 H
7x14	15.4	21.9	981	MM 0714 H
10x14	18.1	24.6	1173	MM 1014 H
12x14	19.6	26.1	1309	MM 1214 H
14x14	21.9	28.4	1515	MM 1414 H
19x14	24.8	31.3	1810	MM 1914 H
24x14	27.4	35.0	2369	MM 2414 H
30x14	30.2	37.8	2726	MM 3014 H
2x12	11.5	17.3	586	MM 0212 H
3x12	12.2	18.0	651	MM 0312 H
4x12	14.1	19.9	779	MM 0412 H
5x12	15.4	21.9	993	MM 0512 H
7x12	16.8	23.3	1147	MM 0712 H
10x12	19.8	26.3	1374	MM 1012 H
12x12	22.4	28.9	1628	MM 1212 H
14x12	23.9	30.4	1776	MM 1412 H
19x12	27.2	34.8	2443	MM 1912 H
24x12	30.0	37.6	2823	MM 2412 H
30x12	33.1	40.7	3329	MM 3012 H
2x10	12.7	18.5	685	MM 0210 H
3x10	14.3	20.1	808	MM 0310 H
4x10	15.6	22.1	1050	MM 0410 H
5x10	17.1	23.6	1181	MM 0510 H
7x10	18.6	25.1	1377	MM 0710 H
10x10	23.1	29.6	1768	MM 1010 H
12x10	24.9	31.4	1980	MM 1210 H
14x10	26.5	34.1	2465	MM 1410 H
19x10	30.2	37.8	2987	MM 1910 H
24x10	33.5	41.1	3542	MM 2410 H
30x10	37.0	46.3	4603	MM 3010 H