Marlew

series ME

600 Volt
Cu 16 up to 10 AWG
XLPE 90°C / LSZH
ICEA S 73-532

Control, signalling, measuring and protective equipment, electric controls of home installations. Use in closed environments with a high concentration of people (airports, hospitals, trains, cinemas, shopping centers, tunnels) and in control rooms with electronic equipment sensitive to the exposure of corrosive gases. Installed in conduits, trays, cable ladders, in direct open air or indoors, buried in a trench or in ducts.

Features

  • Temperature rating: 90ºC (operating), 130°C (overload), 250°C (short circuit)

  • Voltage rating: 600V AC

  • Construction requirements: As per ICEA S 73-532

  • Conductor requirements: As per ASTM B174

  • Conductor: Annealed electrolytic copper; flexible

  • Insulation: XLPE (crosslinked polyethylene)

  • Sheath: LSZH-HFFR (Low Smoke Zero Halogen - Halogen Free Flame Retardant) fire-retardant; sunlight and oils resistant

  • Fire requirements: As per ICEA T 30-520

  • Standard for halogen absence and corrosive gases: As per IEC 60754-1/2

  • Smoke transparency requirements: As per IEC 61034-1/2

  • Oilsrequirements: As per ICEA S 73-532

  • Outdoors requirements: As per UL 2556 (UV rays)

  • Water behaviour requirements: Suitable AD7 (Occasional water submersion)

Fire-retardant

Fire-retardant

Halogen free

Halogen free

Low smoke

Low smoke

Mineral oil resistant

Mineral oil resistant

UV resistant

UV resistant

Water immersion

Water immersion

Identification

Standard
Sheath Conductors
MulticonductorMethod 3 Table E-2

Instalation

falta label en campo?
falta label en campo?
falta label en campo?
Download PDF

ELECTRICAL CHARACTERISTICS

Resistances and intensity of admissible currents

Gauge AWG Electrical resistance at 20°C in C.C. (Ohm/km) Electrical resistance at 75°C in AC. a 60Hz (Ohm/km) Current-carrying capacity (1)
2x 4x 7x 10x 19x 30x
1613.9917.841814.412.6998.1
148.7711.18252017.512.512.511.3
125.527.04302421151513.5
103.484.44403228202018

(1) Current-carrying capacity of cables with up to three conductors, installed in ducts or directly buried, up to an ambient temperature of 30ºC, according to chart 310.15 (B)(16) of the NFPA 70. As from four-conductors, we’ve additionally applied the correction factor for more than three conductors from the chart 310.15 (B)(3)(a) of the NFPA70.

DIMENSIONS & WEIGHT

Cable formation N° Cond. x gauge AWG External diameter mm Weight kg/km Code Mat Number
2x167.782ME 2x16820042120
3x168.196ME 3x16820042130
4x168.8115ME 4x16820042140
5x169.6136ME 5x16820042150
7x1610.4169ME 7x16820042160
10x1614.0254ME 10x16820042170
12x1614.4287ME 12x16820042180
14x1615.1322ME 14x16820042190
19x1616.7409ME 19x16820042200
24x1619.4505ME 24x16820042210
30x1620.6603ME 30x16820042220
2x149.0116ME 2x14820042230
3x149.5138ME 3x14820042240
4x1410.4166ME 4x14820042250
5x1411.3199ME 5x14820042260
7x1412.3250ME 7x14820042270
10x1416.6363ME 10x14820042280
12x1417.1414ME 12x14820042290
14x1418.0469ME 14x14820042300
19x1420.0603ME 19x14820042310
24x1424.3806ME 24x14820042320
30x1425.7964ME 30x14820042330
2x129.9152ME 2x12820042340
3x1210.5184ME 3x12820042350
4x1211.5224ME 4x12820042360
5x1212.6272ME 5x12820042370
7x1214.5371ME 7x12820042380
10x1218.5493ME 10x12820042390
12x1219.1568ME 12x12820042400
19x1223.3896ME 19x12820042420
24x1227.11113ME 24x12820042430
30x1228.81343ME 30x12820042440
2x1011.2208ME 2x10820042450
3x1011.9256ME 3x10820042460
4x1013.0316ME 4x10820042470
5x1015.0411ME 5x10820042480
7x1016.4524ME 7x10820042490
10x1023.8983ME 10x10820042500
19x1026.41280ME 19x10820042530
24x1030.81595ME 24x10820042540
30x1032.71940ME 30x10820042550