series MA

Aluminium/polyester tape helical wrap

600 Volt

Cu 16 up to 10 AWG

Double insulation

ICEA S 73-532

Control, signalling, measuring and protective equipment; electric controls of industrial installations. Installed in aerial trays, gutters or conduits, under roof or ladder under roof, buried in ducts or directly buried. It provides additional electromagnetic protection.

Features

Temperature rating: 90ºC (operating), 160°C (short circuit)
Voltage rating: 600V AC
Construction requirements: As per ICEA S 73-532
Conductor requirements: As per ASTM B174
Conductor: Annealed electrolytic copper; flexible
Primary insulation: Special PVC
Secondary insulation: Nylon
Shield: Aluminium/polyester tape helical wrap with 100% coverage and overlap. Drain wire in contact with the aluminium side of the tape. Drain consists of a 7-wire tinned copper thread
Sheath: PVC fire-retardant; sunlight and mineral-oil resistant.
Fire requirements: As per ICEA T 30-520
Oils requirements: As per ICEA S 73-532
Outdoors requirements: As per UL 2556 (UV rays)

Electromagnetic interference protection

Fire-retardant

Mineral oil resistant

UV resistant

Industrial applications

Tray cable

Identification

	Standard
	Sheath	Conductors
Multiconductor		Method 3 Table E-2

Instalation

Installation temperature

Over conductors

Minimum bend radius

Download PDF

ELECTRICAL CHARACTERISTICS

Resistances and intensity of admissible currents

Gauge AWG	Electrical resistance at 20°C in C.C. (Ohm/km)	Electrical resistance at 90°C in C.A. at 60Hz (Ohm/km)	Current-carrying capacity (1)
Gauge AWG	Electrical resistance at 20°C in C.C. (Ohm/km)	Electrical resistance at 90°C in C.A. at 60Hz (Ohm/km)	2x	4x	7x	10x	19x	30x
16	13.99	17.84	18	14.4	12.6	9	9	8.1
14	8.77	11.18	25	20	17.5	12.5	12.5	11.3
12	5.52	7.04	30	24	21	15	15	13.5
10	3.48	4.44	40	32	28	20	20	18

(1) Current-carrying capacity of cables with up to three conductors, installed in ducts or directly buried, up to an ambient temperature of 30ºC, according to chart 310.15 (B)(16) of the NFPA 70. As from four-conductors, we’ve additionally applied the correction factor for more than three conductors from the chart 310.15 (B)(3)(a) of the NFPA70.

DIMENSIONS & WEIGHT

Cable formation N° Cond. x gauge AWG	External diameter mm	Weight kg/km	Code
2x16	7,4	73	MA 0216
3x16	7,8	92	MA 0316
4x16	8,6	115	MA 0416
5x16	9,3	139	MA 0516
7x16	10	173	MA 0716
10x16	12,3	238	MA 1016
12x16	12,7	274	MA 1216
14x16	14,4	338	MA 1416
16x16	15,1	379	MA 1616
19x16	15,8	432	MA 1916
21x16	16,6	474	MA 2116
24x16	18,1	535	MA 2416
27x16	18,5	590	MA 2716
30x16	19,4	648	MA 3016
32x16	20,1	689	MA 3216
37x16	21,9	829	MA 3716
48x16	24,5	1041	MA 4816
2x14	8,3	96	MA 0214
3x14	8,8	124	MA 0314
4x14	9,6	154	MA 0414
5x14	10,4	188	MA 0514
7x14	11,2	238	MA 0714
10x14	14,6	353	MA 1014
12x14	15,1	408	MA 1214
14x14	16,1	464	MA 1414
16x14	17	527	MA 1614
19x14	17,8	605	MA 1914
21x14	18,7	663	MA 2114
24x14	20,5	754	MA 2414
27x14	21,9	879	MA 2714
30x14	23	968	MA 3014
32x14	23,8	1028	MA 3214
37x14	24,7	1165	MA 3714
48x14	27,7	1471	MA 4814
2x12	9,1	127	MA 0212
3x12	9,7	170	MA 0312
4x12	10,5	212	MA 0412
5x12	11,4	260	MA 0512
7x12	12,4	338	MA 0712
10x12	16,2	499	MA 1012
12x12	16,7	580	MA 1212
14x12	17,9	667	MA 1412
16x12	18,8	753	MA 1612
19x12	19,8	875	MA 1912
21x12	21,8	1008	MA 2112
24x12	23,8	1144	MA 2412
27x12	24,3	1265	MA 2712
30x12	25,5	1393	MA 3012
32x12	26,5	1488	MA 3212
37x12	27,5	1694	MA 3712
48x12	31	2158	MA 4812
2x10	10,9	185	MA 0210
3x10	11,6	252	MA 0310
4x10	12,7	441	MA 0410
5x10	13,9	549	MA 0510
7x10	15,2	710	MA 0710
10x10	19	1045	MA 1010
12x10	19,6	1197	MA 1210
14x10	21,1	1392	MA 1410
16x10	22,3	1585	MA 1610
19x10	23,6	1837	MA 1910
21x10	24,9	2035	MA 2110
24x10	27,4	2371	MA 2410
27x10	28,1	2604	MA 2710
30x10	29,6	2891	MA 3010
32x10	30,8	3107	MA 3210
37x10	32,1	3518	MA 3710
48x10	36,5	4554	MA 4810