Clad series BX-H

Steel wire armour

0.6/1kV

Flexible Cu 1.5 up to 300mm²

XLPE 90°C / PVC

PE conductor

Variable frequency drive motor feed. (VFD) For Alternating Current (50/60Hz), for three-phase systems (380/190V) and systems with voltages up to 1kV. Installed in aerial trays, gutters or conduits, under roof or ladder under roof, buried in ducts or directly buried. It has additional mechanical protection.

Features

Temperature rating: 90ºC (operating), 130ºC (overload), 250ºC (short circuit)
Voltage rating: 600/1000V AC, maximum 1200V AC / 1500V DC
Construction requirements: As per IRAM 2178-1 – IEC 60502-1
Conductor requirements: As per IRAM NM 280 – IEC 60228
Conductor: Annealed electrolytic copper - Flexible stranding class 5
Insulation: XLPE (Crosslinked polyethylene)
Bedding: PVC
Shield: Copper tape (if necessary) with adequate overlap and 100% coverage. See the table for shield cross-section values
Inner sheath: PVC, fire-retardant
Armour: Galvanized steel wire armour
Sheath: PVC, fire-retardant
Fire requirements: As per IEC 60332-1
Outdoors requirements: As per UL 2556 (UV rays)

Electromagnetic interference protection

Fire-retardant

Flexible stranded conductors

UV resistant

Sequentially marked

Industrial applications

Identification

	Standard
	Sheath	Conductors
3 Conductors

Instalation

Installation temperature

Over armour

Minimum bend radius

Constructive variants

The information provided corresponds to the standard version, and different alternatives of insulation and / or covering materials can be used upon request.

Download PDF

ELECTRICAL CHARACTERISTICS

Resistances, reactance and intensity of admissible currents

Nominal cross-section sq (mm²)	Nominal cross-section Concentric conductorsq mm	Electrical resistance at 20°C in C.C. Ohm/km	Electrical resistance at 20°C in C.C. Concentric conductor Ohm/km	Electrical resistance at 90°C en C.C. Ohm/km	Electrical resistance at 90°C en C.C. Concentric conductor Ohm/km	Inductive reactance at 50Hz (Ohm/Km)	Current-carrying capacity of cables in free air at 40°C as per IEC 364-5-523. Cables displayed in Cable Ladder or perforated tray. (Ampere)	Current-carrying capacity of cables directly buried at 25°C soil temperature and soil thermal resistance of 1 km/W as per IEC 364-5-523. (Ampere)



1	6	19.5	3.3	24.86	4.21	0.107	--	--
1.5	6	13.3	3.3	16.96	4.21	0.100	20	28
2.5	6	7.98	3.3	10.18	4.21	0.093	28	37
4	6	4.95	3.3	6.31	4.21	0.088	36	48
6	6	3.3	3.3	4.21	4.21	0.083	47	61
10	10	1.91	1.91	2.44	2.44	0.078	65	83
16	16	1.21	1.21	1.54	1.54	0.075	86	107
25	16	0.78	1.21	0.99	1.54	0.075	109	141
35	16	0.554	1.210	0.707	1.54	0.073	137	168
50	25	0.386	0.780	0.493	0.99	0.073	166	199
70	35	0.272	0.554	0.348	0.707	0.071	213	243
95	50	0.206	0.386	0.264	0.493	0.070	257	293
120	70	0.161	0.272	0.207	0.348	0.070	299	333
150	70	0.129	0.272	0.167	0.348	0.070	345	373
185	95	0.106	0.206	0.138	0.264	0.070	394	425
240	120	0.0801	0.161	0.106	0.207	0.069	465	493
300	150	0.0641	0.129	0.0860	0.167	0.069	537	559

DIMENSIONS & WEIGHT

Cable Formation, N° Cond. x cross-section (mm²)	Diameter under shield mm	Diameter below armour mm	External diameter mm	Weight kg/km	Code
3 x 1	9	12.7	17.3	546	BX 0310 H
3 x 1.5	9	12.7	17.3	552	BX 0315 H
3 x 2.5	9.3	13.1	18.6	722	BX 0325 H
3 x 4	10.3	14.1	19.6	809	BX 0340 H
3 x 6	11.7	15.5	21	928	BX 0360 H
3 x 10	14	17.7	23.2	1197	BX 3100 H
3 x 16	16	19.8	26	1664	BX 3160 H
3 x 25	19.5	23.3	29.5	2,128	BX 3250 H
3 x 35	21.7	25.5	31.9	2,541	BX 3350 H
3 x 50	25.1	28.9	36.8	3,596	BX 3500 H
3 x 70	30.3	34.1	42.2	4,707	BX 3700 H
3 x 95	34.6	39.4	47.7	5,861	BX 3950 H
3 x 120	38	43.1	52.8	7,595	BX 31200 H
3 x 150	44.1	49.3	59	9,063	BX 31500 H
3 x 185	47.9	53.4	63.9	10,872	BX 31850 H
3 x 240	55.3	60.9	71.8	13,617	BX 32400 H