series BSPU

0.6/1kV

Flexible CU 1.5 up to 150mm²

EPR 90°C / PUR

Includes PE conductor

For Alternating Current (50/60Hz), for single-phase systems (220/110V), three-phase systems (380/190V) and systems with voltages up to 1kV. For Direct Current, used in systems with voltages up to 1.5kV Power supply of submersible pumps in aggressive environmental conditions such as sewage, contaminated water, various chemicals, oils and salts. Suitable for work in hydrocarbon exploration areas.

Features

Temperature rating: 90ºC (operating), 130ºC (overload), 250ºC (short circuit)
Voltage rating: 600/1000V AC, maximum 1200V AC / 1500V DC
Construction requirements: As per IRAM 63007
Conductor requirements: As per IRAM NM 280 – IEC 60228
Conductor: Annealed electrolytic copper - Flexible stranding class 5
Insulation: EPR
Construction: The conductos are arranged parallel line
Sheath: Polyurethane, fire-retardant and chemical agents resistant
Fire requirements: As per IEC 60332-1
Oils requirements: As per ICEA S 73-532
Hydrocarbons requirements: As per UIC 895 OR
Outdoors requirements: As per UL 2556 (UV rays)
Permanent immersion test in water: AD8

Flame retardant

High flexibility

UV resistant

Hydrocarbon resistant

Submersible Pump

Diving up to 800 meters

Identification

	Estandar
	Cubierta	Conductores
3 Conductors
4 Conductors

Instalation

Over conductors

Minimum bend radius

Installation temperature

Constructive variants

The information provided corresponds to the standard version, and different alternatives of insulation and / or covering materials can be used upon request.

Download PDF

ELECTRICAL CHARACTERISTICS

Resistances, reactance and intensity of admissible currents

Nominal cross-section (mm²)	Electrical resistance at 20°C in C.C. (Ohm/km)	Electrical resistance at 90°C en C.C. (Ohm/km)	Inductive reactance at 50Hz (Ohm/Km)	Current-carrying capacity of cables in free air at 40°C as per IEC 364-5-523. (1) (Amper)


1.5	13.3	16.96	0.126	19
2.5	7.98	10.18	0.118	26
4	4.95	6.31	0.112	34
6	3.3	4.21	0.105	45
10	1.91	2.44	0.103	62
16	1.21	1.54	0.098	83
25	0.78	0.99	0.097	122
35	0.554	0.707	0.095	152
50	0.386	0.493	0.094	187
70	0.272	0.348	0.091	241
95	0.206	0.264	0.09	295
120 (2)	0.161	0.207	0.088	346
150 (2)	0.129	0.167	0.088	381

(1) Cables installed in air at 40ºC according to IEC 364-5-523. These values can be taken as a reference for cables submerged or in contact with water in wells up to 100 meters deep. When it comes to depths greater than 100 meters, each particular case must be studied as to how the cable will be affected by the environment due to temperatures, liquids and other conditions that may impair the conduction of the cable.For more information on allowable intensity values and types of installation, we suggest consulting the IEC 364-5-523 standard.(2) These sections are outside the scope of IRAM 63007.

DIMENSIONS & WEIGHT

Final height	Final width	Weight	Radius of curvature	Code
mm	mm	kg/km	mm	Code
6.0	13.1	114	42	BSPU 3x1.5
6.6	14.6	154	46	BSPU 3x2.5
7.05	16.0	203	49	BSPU 3x4
7.7	17.9	268	54	BSPU 3x6
9.4	22.5	435	65	BSPU 3x10
10.5	25.5	615	74	BSPU 3x16
12.3	30.5	917	86	BSPU 3x25
13.3	33.5	1,208	93	BSPU 3x35
15.5	39.3	1,690	109	BSPU 3x50
17.7	45.5	2,323	124	BSPU 3x70
20.3	52.9	3,042	142	BSPU 3x95
21.9	57.3	3,809	153	BSPU 3x120
24.7	65.3	4,725	173	BSPU 3x150
6.0	13.1	103	42	BSPU 3x1.5+PE1.5
6.6	14.6	140	46	BSPU 3x2.5+PE2.5
7.1	16.0	187	50	BSPU 3x4+PE4
7.7	17.9	250	54	BSPU 3x6+PE6
9.4	22.5	409	66	BSPU 3x10+PE10
10.5	25.5	582	74	BSPU 3x16+PE16
12.3	30.5	874	86	BSPU 3x25+PE25
13.3	33.5	1,160	93	BSPU 3x35+PE35
15.5	39.3	1,625	109	BSPU 3x50+PE50
17.7	45.5	2,242	124	BSPU 3x70+PE70
20.3	52.9	2,938	142	BSPU 3x95+PE95
21.9	57.3	3,689	153	BSPU 3x120+PE120