Temperature rating: 75°C

Voltage rating:: 300 Volt

Construction requirements: As per UL13

Conductor requirements: As per ASTM B8 Clase B

Conductor: Tinned annealed electrolytic copper, 7-wire stranding

Insulation: Thermoplastic compound

Lay length: 50mm (20 twists/m)

Shield: Aluminium-polyester tape wrap (100% coverage) plus tinned-copper braid (90% coverage)

Armour: Galvanized steel wire armour

Sheath: Flame retardant PVC; sunlight and hydrocarbon-resistant

Fire requirements: As per UL 1685

Hydrocarbons standard: As per NFC 32-200 – ASTM D 1239

Oils requirements: As per ICEA S 73-532

Outdoors requirements: As per UL 2556 (UV rays)

NEC code (NFPA 70): Art. 725 PLTC – Art. 727 ITC – Art. 800 CM – Art. 501 classified areas CL1 Div.2 y Cl2 Div.2

Connection: The maximum length for the RS 485 cable is 1200 meters , without the use of amplifiers. For longer distances, a signal re-generation and amplification device must be used. The RS485 is a bus series cable, therefore, the installation of equipment in star or ring is not allowed . It is recommended to avoid the passage of these cables near cables and power equipment, which produce electromagnetic induction which may cause the system malfunction.