Clad series MA-F

Aluminium/polyester tape helical wrap + Steel tape armour

600 Volt
Cu 16 up to 10 AWG
Double insulation
ICEA S 73-532

Control, signalling, measuring and protective equipment; electric controls of industrial installations. Installed in aerial trays, gutters or conduits, under roof or ladder under roof, buried in ducts or directly buried. It counts with additional electromagnetic and mechanical protection.

Features

  • Temperature rating: 90ºC (operating), 160°C (short circuit)

  • Voltage rating: 600V AC

  • Construction requirements: As per ICEA S 73-532

  • Conductor requirements: As per ASTM B174

  • Conductor: Annealed electrolytic copper; flexible

  • Primary insulation: Special PVC

  • Secondary insulation: Nylon

  • Shield: Aluminium/polyester tape helical wrap with 100% coverage and overlap. Drain wire in contact with the aluminium side of the tape. Drain consists of a 7-wire tinned copper thread

  • Inner sheath: PVC

  • Armour: Double galvanized steel helical tape

  • Sheath: PVC fire-retardant; sunlight and mineral-oil resistant.

  • Fire requirements: As per ICEA T 30-520

  • Oils requirements: As per ICEA S 73-532

  • Outdoors requirements: As per UL 2556 (UV rays)

Electromagnetic interference protection

Electromagnetic interference protection

Fire-retardant

Fire-retardant

Mineral oil resistant

Mineral oil resistant

UV resistant

UV resistant

Industrial applications

Industrial applications

Direct burial

Direct burial

Identification

Standard
Sheath Conductors
MulticonductorMethod 3 Table E-2

Instalation

falta label en campo?
falta label en campo?
falta label en campo?

DIMENSIONS & WEIGHT

Cable formation N° Cond. x gauge AWG Diameter under armour mm External diameter mm Weight kg/km Code
7 x 161014.1331MA 0716 F
10 x 1612.316.4424MA 1016 F
12 x 1612.716.7462MA 1216 F
14 x 1614.318.4547MA 1416 F
16 x 161519.1593MA 1616 F
19 x 1615.819.9658MA 1916 F
21 x 1616.620.7707MA 2116 F
24 x 161822.1785MA 2416 F
27 x 1618.422.5841MA 2716 F
30 x 1619.323.4907MA 3016 F
32 x 162024.1954MA 3216 F
37 x 1620.824.91052MA 3716 F
48 x 1624.428.51351MA 4816 F
4 x 141014.1324MA 0414 F
5 x 1410.214.3341MA 0514 F
7 x 141115.1405MA 0714 F
10 x 1414.318.4561MA 1014 F
12 x 1414.818.9617MA 1214 F
14 x 1415.819.9686MA 1414 F
16 x 1416.620.7750MA 1614 F
19 x 1417.421.5840MA 1914 F
21 x 1418.422.5908MA 2114 F
24 x 142024.11013MA 2414 F
27 x 1420.424.51092MA 2714 F
30 x 1422.526.61250MA 3014 F
32 x 1423.327.41316MA 3214 F
37 x 1424.128.21457MA 3714 F
48 x 1427.131.21788MA 4814 F
3 x 121014.1331MA 0312 F
4 x 1210.514.6371MA 0412 F
5 x 1211.415.5424MA 0512 F
7 x 1212.416.5514MA 0712 F
10 x 1216.220.3717MA 1012 F
12 x 1216.720.7797MA 1212 F
14 x 1217.821.9892MA 1412 F
16 x 1218.822.9983MA 1612 F
19 x 1219.823.91112MA 1912 F
21 x 1221.9261269MA 2112 F
24 x 1223.827.91420MA 2412 F
27 x 1224.328.41536MA 2712 F
30 x 1225.529.61669MA 3012 F
32 x 1226.430.51762MA 3212 F
37 x 1227.431.51967MA 3712 F
48 x 1230.936.22786MA 4812 F
2 x 1010.915351MA 0210 F
3 x 1011.515.6419MA 0310 F
4 x 1012.616.7497MA 0410 F
5 x 1014.618.7612MA 0510 F
7 x 1015.819.9752MA 0710 F
10 x 1019.623.71002MA 1010 F
12 x 1020.224.31127MA 1210 F
14 x 1022.726.81336MA 1410 F
16 x 1023.9281477MA 1610 F
19 x 1025.229.31680MA 1910 F
21 x 1026.630.61825MA 2110 F
24 x 1028.934.22379MA 2410 F
27 x 1029.634.92570MA 2710 F
30 x 1031.136.42791MA 3010 F
32 x 1032.337.62945MA 3210 F
37 x 1033.538.83278MA 3710 F
48 x 1037.9444125MA 4810 F

ELECTRICAL CHARACTERISTICS

Resistances and intensity of admissible currents

Gauge AWG Electrical resistance at 20°C in C.C. (Ohm/km) Electrical resistance at 90°C in C.A. at 60Hz (Ohm/km) Current-carrying capacity (1)
2x 4x 7x 10x 19x 30x
1613.9917.841814.412.6998.1
148.7711.18252017.512.512.511.3
125.527.04302421151513.5
103.484.44403228202018

(1) Current-carrying capacity of cables with up to three conductors, installed in ducts or directly buried, up to an ambient temperature of 30ºC, according to chart 310.15 (B)(16) of the NFPA 70. As from four-conductors, we’ve additionally applied the correction factor for more than three conductors from the chart 310.15 (B)(3)(a) of the NFPA70.