series GX

Corrugated copper shielding

0.6/1kV

Flexible Cu 1 up to 4mm²

XLPE 90°C / PVC

Electromagnetic protection

Control, signalling, measuring and protective equipment, electric controls of high voltage substations (SSEE), its shielding allows adequate filtering of electromagnetic interference at frequencies up to 1 MHz. Installed in aerial trays, gutters or conduits, under roof or ladder under roof, buried in ducts or directly buried.

Features

Temperature rating: 90ºC (operating), 130ºC (overload), 250ºC (short circuit)
Voltage rating: 600/1000V AC, maximum 1200V AC / 1500V DC
Construction requirements: As per IRAM 2178-1 – IEC 60502-1
Conductor requirements: As per IRAM NM 280 – IEC 60228
Conductor: Annealed electrolytic copper; class 5 stranding
Insulation: XLPE (Cross-linked polyethylene)
Bedding: PVC
Shield: Corrugated copper tape longitudinal overlapping wrap
Sheath: PVC, fire-retardant sunlight and oils resistant
Fire requirements: As per IEC 60332-3-24
EMC requirements: Transfer impedance lower than 2 ohm/km up to 1MHz (as per IRAM 63020; HN 33-S-34)
Oils requirements: As per ICEA S 73-532
Outdoors requirements: As per UL 2556 (UV rays)

Corrugated copper shield

Flame retardant

Flexible stranded conductors

Mineral oil resistant

UV resistant

Industrial applications

Identification

	Standard
	Sheath	Conductors
Multiconductors		with alpha-numerically

Instalation

Installation temperature

Over conductors

Minimum bend radius

Constructive variants

The information provided corresponds to the standard version, and different alternatives of insulation and / or covering materials can be used upon request.

Download PDF

ELECTRICAL CHARACTERISTICS

Resistances and intensity of admissible currents

Nominal cross-section sq mm²	Electrical resistance at 20ºC in C.C Ohm/km	Electrical resistance at 90ºC in C.A. Ohm/km	Current-carrying capacity in free air. At 40°C as per IEC 364-5-523. Formations in perforated trays or ladder type. (Ampere)
Nominal cross-section sq mm²	Electrical resistance at 20ºC in C.C Ohm/km	Electrical resistance at 90ºC in C.A. Ohm/km	2x	4x	7x	10x	19x	30x	48x
1	19.5	24.86	--	--	--	--	--	--	--
1.5	13.3	16.96	23	20	16.1	11.5	11.5	10.4	8.1
2.5	7.98	10.18	31	28	21.7	15.5	15.5	14.0	10.9
4	4.95	6.31	43	36	30.1	21.5	21.5	19.4	--

As from seven-conductors, we’ve additionally applied the correction factor for more than three conductors the chart 310.15 (B)(3)(a) of the NFPA70.

DIMENSIONS & WEIGHT

Cable formation N° Cond. x cross-section (mm²)	Diameter below shield mm	External diameter mm	Weight kg/km	Code
2x1	8.7	14.6	314	GX 0210
3x1	8.7	14.6	317	GX 0310
4x1	8.7	14.6	318	GX 0410
5x1	8.7	14.6	321	GX 0510
7x1	9.7	15.6	361	GX 0710
10x1	11.7	17.6	431	GX 1010
12x1	12.2	18.1	452	GX 1210
14x1	13.2	19.1	495	GX 1410
19x1	15.2	21.1	590	GX 1910
24x1	16.7	22.6	667	GX 2410
30x1	18.7	24.6	777	GX 3010
37x1	20.7	26.6	898	GX 3710
48x1	23.2	29.1	1072	GX 4810
2x1.5	8.7	14.6	319	GX 0215
3x1.5	8.7	14.6	324	GX 0315
4x1.5	8.7	14.6	328	GX 0415
5x1.5	9.7	15.6	366	GX 0515
7x1.5	10.2	16.1	396	GX 0715
10x1.5	12.7	18.6	492	GX 1015
12x1.5	13.7	19.6	540	GX 1215
14x1.5	14.2	20.1	568	GX 1415
19x1.5	16.7	22.6	703	GX 1915
24x1.5	18.2	24.1	796	GX 2415
30x1.5	20.2	26.1	926	GX 3015
37x1.5	22.2	28.1	1068	GX 3715
48x1.5	25.2	31.3	1329	GX 4815
2x2.5	8.7	14.6	330	GX 0225
3x2.5	8.7	14.6	341	GX 0325
4x2.5	9.7	15.6	381	GX 0425
5x2.5	10.7	16.6	427	GX 0525
7x2.5	11.7	17.6	489	GX 0725
10x2.5	14.2	20.1	601	GX 1025
12x2.5	15.2	21.1	663	GX 1225
14x2.5	16.2	22.1	726	GX 1425
19x2.5	18.7	24.6	894	GX 1925
24x2.5	20.7	26.6	1048	GX 2425
30x2.5	23.2	29.1	1256	GX 3025
37x2.5	25.7	31.6	1485	GX 3725
48x2.5	29.5	36	1914	GX 4825
2x4	9.7	15.6	380	GX 0240
3x4	10.2	16.1	416	GX 0340
4x4	11.2	17.1	469	GX 0440
5x4	12.2	18.1	526	GX 0540
7x4	13.2	19.1	610	GX 0740
10x4	16.2	22.1	769	GX 1040
12x4	17.7	23.6	876	GX 1240
14x4	18.7	24.6	959	GX 1440
19x4	21.7	27.6	1211	GX 1940
24x4	24.2	30.1	1456	GX 2440
30x4	26.7	32.8	1751	GX 3040
37x4	29.5	36	2103	GX 3740