Block series FX-W

Copper tape shield

0.6/1kV

Flexible Cu 1 up to 4mm²

Up to 48 Conductors

XLPE 90°C / PVC

Control, signalling, measuring and protective equipment; electric controls of industrial installations. Installed in aerial trays, gutters or conduits, under roof or ladder under roof, buried in ducts or directly buried. It provides additional electromagnetic protection.

Features

Temperature rating: 90ºC (operating),130ºC (overload) and 250ºC (short circuit)
Voltage rating: 600/1000V AC, maximum 1200V AC / 1500V DC
Construction requirements: As per IRAM 2178-1 – IEC 60502-1
Conductor requirements: As per IRAM NM 280 – IEC 60228
Conductor: Annealed electrolytic copper - Flexible stranding class 5
Insulation: XLPE (Cross-linked polyethylene)
Shield: Annealed copper tape helical wrap with 100% coverage and overlap
Sheath: PVC, fire-retardant; sunlight and oils resistant
Fire requirements: As per IEC 60332-1
Oils requirements: As per ICEA S 73-532
Outdoor requirements: As per UL 2556 (UV rays)

Electromagnetic interference protection

Flame retardant

Mineral oil resistant

UV resistant

Industrial applications

Tray cable

Identification

	Standard
	Sheath	Conductors
Multiconductors		alphanumeric identification

Instalation

Installation temperature

Over conductors

Minimum bend radius

Constructive variants

The information provided corresponds to the standard version, and different alternatives of insulation and / or covering materials can be used upon request.

Download PDF

ELECTRICAL CHARACTERISTICS

Resistances and intensity of admissible currents

Nominal cross-section sq mm²	Electrical resistance at 20ºC in C.C Ohm/km	Electrical resistance at 90ºC in C.A. Ohm/km	Current-carrying capacity in free air. At 40°C as per IEC 364-5-523. Formations in perforated trays or ladder type. (Ampere)
Nominal cross-section sq mm²	Electrical resistance at 20ºC in C.C Ohm/km	Electrical resistance at 90ºC in C.A. Ohm/km	2x	4x	7x	10x	19x	30x	48x
1	19.5	24.86	--	--	--	--	--	--	--
1.5	13.3	16.96	23	20	16.1	11.5	11.5	10.4	8.1
2.5	7.98	10.18	31	28	21.7	15.5	15.5	14.0	10.9
4	4.95	6.31	43	36	30.1	21.5	21.5	19.4	--

As from seven-conductors, we’ve additionally applied the correction factor for more than three conductors the chart 310.15 (B)(3)(a) of the NFPA70.

DIMENSIONS & WEIGHT

Cable Formation N° Cond. x cross-section (mm²)	Diameter below shield mm	External diameter mm	Weight kg/km	Code
5x1	9.0	12.4	217	FX 0510 W
7x1	9.8	13.1	243	FX 0710 W
10x1	11.6	14.9	304	FX 1010 W
12x1	12.5	15.8	341	FX 1210 W
14x1	13.4	16.7	376	FX 1410 W
19x1	15.2	18.5	461	FX 1910 W
24x1	16.8	20.1	543	FX 2410 W
30x1	18.6	21.9	638	FX 3010 W
37x1	20.4	23.8	761	FX 3710 W
48x1	22.9	26.3	928	FX 4810 W
3x1.5	9.0	12.4	220	FX 0310 W
4x1.5	9.0	12.4	223	FX 0415 W
5x1.5	9.7	13.1	245	FX 0515 W
7x1.5	10.6	13.9	287	FX 0715 W
10x1.5	12.6	15.9	362	FX 1015 W
12x1.5	13.6	16.9	408	FX 1215 W
14x1.5	14.5	17.8	453	FX 1415 W
19x1.5	16.5	19.8	563	FX 1915 W
24x1.5	18.3	21.6	669	FX 2415 W
30x1.5	20.2	23.6	808	FX 3015 W
37x1.5	22.2	25.6	951	FX 3715 W
48x1.5	25.0	28.4	1170	FX 4815 W
2x2.5	9.0	12.4	225	FX 0225 W
3x2.5	9.1	12.5	240	FX 0325 W
4x2.5	10.0	13.3	269	FX 0425 W
5x2.5	10.9	14.2	312	FX 0525 W
7x2.5	11.9	15.2	373	FX 0725 W
10x2.5	14.1	17.5	472	FX 1025 W
12x2.5	15.3	18.6	538	FX 1225 W
14x2.5	16.3	19.7	603	FX 1425 W
19x2.5	18.7	22.0	762	FX 1925 W
24x2.5	20.7	24.1	931	FX 2425 W
30x2.5	22.9	26.3	1113	FX 3025 W
37x2.5	25.3	28.7	1323	FX 3725 W
48x2.5	28.9	32.7	1705	FX 4825 W
2x4	9.7	13.0	257	FX 0240 W
3x4	10.3	13.6	296	FX 0340 W
4x4	11.3	14.6	348	FX 0440 W
5x4	12.3	15.7	407	FX 0540 W
7x4	13.5	16.8	496	FX 0740 W
10x4	16.1	19.4	633	FX 1040 W
12x4	17.4	20.7	729	FX 1240 W
14x4	18.6	21.9	823	FX 1440 W
19x4	21.3	24.7	1069	FX 1940 W
24x4	23.7	27.1	1297	FX 2440 W
30x4	26.3	29.9	1578	FX 3040 W
37x4	29.4	33.2	1935	FX 3740 W