Clad series FX-H

Steel wire armour

0.6/1kV

Flexible Cu 1 up to 4mm²

Up to 48 Conductors

XLPE 90°C / PVC

Control, signalling, measuring and protective equipment; electric controls of industrial installations. Installed in aerial trays, gutters or conduits, under roof or ladder under roof, buried in ducts or directly buried. It has additional mechanical protection.

Features

Temperature rating: 90ºC (operating),130ºC (overload) and 250ºC (short circuit)
Voltage rating: 600/1000V AC, maximum 1200V AC / 1500V DC
Construction requirements: As per IRAM 2178-1 – IEC 60502-1
Conductor requirements: As per IRAM NM 280 – IEC 60228
Conductor: Annealed electrolytic copper - Flexible stranding class 5
Insulation: XLPE (Cross-linked polyethylene)
Bedding: PVC
Armour: Galvanized steel wire armour
Sheath: PVC, fire-retardant; sunlight and oils resistant
Fire requirements: As per IEC 60332-1
Oils requirements: As per ICEA S 73-532
Outdoor requirements: As per UL 2556 (UV rays)

Flame retardant

Mineral oil resistant

UV resistant

Industrial applications

Tray cable

Direct burial

Identification

	Standard
	Sheath	Conductors
Multiconductors		alphanumeric identification

Instalation

Installation temperature

Over armour

Minimum bend radius

Constructive variants

The information provided corresponds to the standard version, and different alternatives of insulation and / or covering materials can be used upon request.

Download PDF

ELECTRICAL CHARACTERISTICS

Resistances and intensity of admissible currents

Nominal cross-section sq mm²	Electrical resistance at 20ºC in C.C Ohm/km	Electrical resistance at 90ºC in C.A. Ohm/km	Current-carrying capacity in free air. At 40°C as per IEC 364-5-523. Formations in perforated trays or ladder type. (Ampere)
Nominal cross-section sq mm²	Electrical resistance at 20ºC in C.C Ohm/km	Electrical resistance at 90ºC in C.A. Ohm/km	2x	4x	7x	10x	19x	30x	48x
1	19.5	24.86	--	--	--	--	--	--	--
1.5	13.3	16.96	23	20	16.1	11.5	11.5	10.4	8.1
2.5	7.98	10.18	31	28	21.7	15.5	15.5	14.0	10.9
4	4.95	6.31	43	36	30.1	21.5	21.5	19.4	--

As from seven-conductors, we’ve additionally applied the correction factor for more than three conductors the chart 310.15 (B)(3)(a) of the NFPA70.

DIMENSIONS & WEIGHT

Cable Formation N° Cond. x cross-section (mm²)	Diameter under armour mm	External diameter mm	Weight kg/km	Code
2x1	7.2	11.8	254	FX 0210 H
3x1	7.6	12.2	272	FX 0310 H
4x1	8.3	12.9	303	FX 0410 H
5x1	9.0	13.6	334	FX 0510 H
7x1	9.8	14.4	377	FX 0710 H
10x1	11.6	17.1	557	FX 1010 H
12x1	12.5	18.0	611	FX 1210 H
14x1	13.3	18.8	664	FX 1410 H
19x1	15.2	20.7	795	FX 1910 H
24x1	16.8	23.0	1033	FX 2410 H
30x1	18.6	24.8	1185	FX 3010 H
37x1	20.4	26.6	1338	FX 3710 H
48x1	22.9	29.3	1592	FX 4810 H
2x1.5	7.7	12.3	281	FX 0215 H
3x1.5	8.2	12.8	302	FX 0315 H
4x1.5	8.9	13.5	339	FX 0415 H
5x1.5	9.7	14.3	380	FX 0515 H
7x1.5	10.6	15.2	432	FX 0715 H
10x1.5	12.5	18.0	642	FX 1015 H
12x1.5	13.5	19.0	705	FX 1215 H
14x1.5	14.4	19.9	769	FX 1415 H
19x1.5	16.5	22.0	913	FX 1915 H
24x1.5	18.3	24.5	1188	FX 2415 H
30x1.5	20.2	26.4	1385	FX 3015 H
37x1.5	22.2	28.4	1571	FX 3715 H
48x1.5	25.0	31.4	1877	FX 4815 H
2x2.5	8.6	13.2	327	FX 0225 H
3x2.5	9.1	13.7	357	FX 0325 H
4x2.5	10.0	14.6	403	FX 0425 H
5x2.5	10.9	15.5	460	FX 0525 H
7x2.5	11.9	17.4	647	FX 0725 H
10x2.5	14.1	19.6	778	FX 1025 H
12x2.5	15.3	20.8	872	FX 1225 H
14x2.5	16.3	21.8	954	FX 1425 H
19x2.5	18.7	24.9	1296	FX 1925 H
24x2.5	20.7	26.9	1510	FX 2425 H
30x2.5	22.9	29.3	1777	FX 3025 H
37x2.5	25.3	31.7	2046	FX 3725 H
48x2.5	28.9	36.8	2807	FX 4825 H
2x4	9.7	14.3	387	FX 0240 H
3x4	10.3	14.9	438	FX 0340 H
4x4	11.3	15.9	499	FX 0440 H
5x4	12.3	17.8	691	FX 0540 H
7x4	13.5	19.0	807	FX 0740 H
10x4	16.0	22.2	1108	FX 1040 H
12x4	17.4	23.6	1234	FX 1240 H
14x4	18.6	24.8	1357	FX 1440 H
19x4	21.3	27.5	1663	FX 1940 H
24x4	23.7	30.1	1963	FX 2440 H
30x4	26.3	32.9	2332	FX 3040 H
37x4	29.4032	37.3032	3062	FX 3740 H