series BSR
Rounded Single-conductor to four-conductor cables
Power supply of submersible pumps used in potable-water wells under 40ºC, in flooded areas, to evacuate swimming pools, to filter or clean the water in tanks or similar sites. For Alternating Current (50/60Hz), for single-phase systems (220/110V), three-phase systems (380/190V) and systems with voltages up to 1kV. For Direct Current, used in systems with voltages up to 1.5kV
Features
Temperature ratings: 90°C (Operating) – 130°C (Overload) – 25 0°C (Short-Circuit)
Voltage rating: 600/1000 Volt A.C. – 1200 Volt A.C. (Max) – 1500 Volt D.C.
Construction requirements: IRAM 63007
Conductor requirements: IRAM NM 280 – IEC 60228
Conductor: Annealed electrolytic copper - Flexible stranding class 5
Insulation: XLPE (Cross-Linked Polyethylene)
Assembly: Conductors gathered
Sheath: Flame retardant PVC
Fire requirements: As per IEC 60332-1
Outdoors requirements: As per UL 2556 (rayos UV)
Flame retardant
Grounded conductor
Flexible stranded conductors
UV resistant
Industrial applications
Submersible Pump
Identification
| Standard | ||
|---|---|---|
| Sheath | Conductors | |
| 1 Conductor |  |  |
| 2 Conductors | |  |
| 3 Conductors | |  |
| 4 Conductors | |  |
Instalation
Constructive variants
The information provided corresponds to the standard version, and different alternatives of insulation and / or covering can be used upon request.
ELECTRICAL CHARACTERISTICS
Resistances and reactance
| Nominal cross-section (mm²) | Class 5. Electrical resistance in D.C. at 20°C (Ohm/km) | Electrical resistance in C.C. at 90°C (Ohm/km) | Inductive reactance at 50Hz (Ohm/Km) | ||||
|---|---|---|---|---|---|---|---|
| 1 Conductor (1) | 1 Conductor (2) | 1 Conductor (3) | Multiconductor (4) | 4 Conductors (5) | |||
 |  |  |  |  | |||
| 1.5 | 13.3 | 16.96 | -- | -- | -- | 0.118 | 0.126 |
| 2.5 | 7.98 | 10.18 | -- | -- | -- | 0.109 | 0.117 |
| 4 | 4.95 | 6.31 | -- | -- | -- | -- | 0.11 |
| 6 | 3.3 | 4.21 | -- | -- | -- | -- | 0.103 |
| 10 | 1.91 | 2.44 | -- | -- | -- | -- | 0.099 |
| 16 | 1.21 | 1.54 | -- | -- | -- | -- | 0.094 |
| 25 | 0.78 | 0.99 | 0.117 | 0.161 | 0.103 | -- | 0.094 |
| 35 | 0.554 | 0.71 | 0.13 | 0.156 | 0.098 | -- | 0.091 |
| 50 | 0.386 | 0.49 | 0.11 | 0.153 | 0.095 | -- | 0.09 |
| 70 | 0.272 | 0.35 | 0.104 | 0.148 | 0.09 | -- | 0.086 |
| 95 | 0.206 | 0.26 | 0.103 | 0.147 | 0.088 | -- | 0.086 |
| 120 | 0.161 | 0.21 | 0.101 | 0.144 | 0.086 | -- | -- |
| 150 | 0.129 | 0.17 | 0.099 | 0.143 | 0.085 | -- | -- |
(1) Three single conductor cables displayed in flat, in contact with each other. (2) Three single conductor cables displayed in flat, separated by 1 diameter between each other. (3) Three single-conductor cables displayed in a trefoil in contact with each other. (4) Calculation of Inductive reactance valid for two-conductor and three conductor cables. (5) Calculation of Inductive reactance valid for four-conductor cables.
Intensity of admissible currents
| Nominal cross-section (mm²) | Current-carrying capacity of cables in free air at 40°C as per IEC 364-5-523.Single-conductors cable up to 16mm² in contact with each other, displayed in unperforated trays, remaining cross-sections, single-conductors displays and formations in cable ladder or perforated cable trays (Ampere) | Current-carrying capacity of cables directly buried at 25°C soil temperature and soil thermal resistance of 1 km/W as per IEC 364-5-523 (Ampere) | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Unipolar (1) | Unipolar (2) | Unipolar (3) | Bipolar | Multipolar | Unipolar (1) | Unipolar (2) | Bipolar | Multipolar | |
| | | |  |  | | | | | |
| 1.5 | -- | -- | -- | 23 | 20 | -- | -- | 32 | 28 |
| 2.5 | -- | -- | -- | 31 | 28 | -- | -- | 44 | 37 |
| 4 | -- | -- | -- | -- | 36 | -- | -- | -- | 48 |
| 6 | -- | -- | -- | -- | 47 | -- | -- | -- | 61 |
| 10 | -- | -- | -- | -- | 65 | -- | -- | -- | 83 |
| 16 | -- | -- | -- | -- | 86 | -- | -- | -- | 107 |
| 25 | 122 | 158 | 117 | -- | 109 | 157 | 168 | -- | 141 |
| 35 | 152 | 196 | 146 | -- | 137 | 188 | 201 | -- | 168 |
| 50 | 187 | 238 | 179 | -- | 166 | 220 | 235 | -- | 199 |
| 70 | 241 | 305 | 232 | -- | 213 | 271 | 290 | -- | 243 |
| 95 | 295 | 371 | 283 | -- | 257 | 326 | 349 | -- | 293 |
| 120 | 346 | 432 | 332 | -- | -- | 371 | 397 | -- | -- |
| 150 | 401 | 499 | 384 | -- | -- | 415 | 444 | -- | -- |
(1) Three single conductor cables displayed in flat, in contact with each other. (2) Three single conductor cables displayed in flat, separated by 1 diameter between each other. (3) Three single-conductor cables displayed in a trefoil in contact with each other.
DIMENSIONS & WEIGHT
| Cable Formation, N° Cond. x cross-section (mm²) | External diameter mm | Weight kg/km | Code |
|---|---|---|---|
| 1 x 25 | 12.3 | 522 | BSR 1250 |
| 1 x 35 | 13.5 | 661 | BSR 1350 |
| 1 x 50 | 15.3 | 849 | BSR 1500 |
| 1 x 70 | 17.5 | 1125 | BSR 1700 |
| 1 x 95 | 20.3 | 1458 | BSR 1950 |
| 1 x 120 | 21.7 | 1735 | BSR 11200 |
| 1 x 150 | 24.5 | 2132 | BSR 11500 |
| 2 x 1.5 | 10.5 | 405 | BSR 0215 |
| 2 x 2.5 | 11.4 | 480 | BSR 0225 |
| 3 x 1.5 | 11.1 | 419 | BSR 0315 |
| 3 x 2.5 | 12.1 | 499 | BSR 0325 |
| 3 x 4 | 13.3 | 619 | BSR 0340 |
| 3 x 6 | 14.7 | 760 | BSR 0360 |
| 3 x 10 | 18.0 | 1144 | BSR 3100 |
| 3 x 16 | 22.3 | 1313 | BSR 3160 |
| 3 x 25 | 26.4 | 1836 | BSR 3250 |
| 3 x 35 | 28.7 | 2278 | BSR 3350 |
| 3 x 50 | 33.2 | 3034 | BSR 3500 |
| 3 x 70 | 37.7 | 3960 | BSR 3700 |
| 3 x 95 | 44.1 | 5244 | BSR 3950 |
| 4 x 1.5 | 12.2 | 466 | BSR 0415 |
| 4 x 2.5 | 13.4 | 583 | BSR 0425 |
| 4 x 4 | 14.5 | 698 | BSR 0440 |
| 4 x 6 | 16.3 | 890 | BSR 0460 |
| 4 x 10 | 20.0 | 1339 | BSR 4100 |
| 4 x 16 | 24.3 | 1551 | BSR 4160 |
| 4 x 25 | 29.1 | 2239 | BSR 4250 |
| 4 x 35 | 32.1 | 2831 | BSR 4350 |
| 4 x 50 | 36.7 | 3723 | BSR 4500 |
| 4 x 70 | 42.1 | 4930 | BSR 4700 |
| 4 x 95 | 48.8 | 6447 | BSR 4950 |